- - - - - - -
Set & Grow Plant & Shape Prune & Scrape Fill & Flow Filter Parts Bubbles & Pop Scape & Shape

Filtration Pipes

Glass G Series

Filtration Pipes for braceless aquariums

The Fill & Flow System Consists of a Fill Pipe transporting water from the aquarium to an external filter, and a Flow Pipe bringing clean water from the filter backto aquarium. Both pieces are made with highest quality laboratory-grade borosilicate glass and artistically hand-blown.

Outflow

Outflow G Series

The Flow pipe carries an unique upward-angled funnel design to create a vortex effect on the water surface that eliminates surface film. It also increases water movement to lower parts of the aquarium. This reduces stagnant points and improves gas and nutrient exchange for low and midground plants. To aerate the water, simply lift the funnel slightly above water level.

Code Name Pipe Size (mm) For Tank (cm)
160-111 Flow G2 13 60-90
160-121 Flow G3 17 120-180

Inflow

Inflow G Series

The Fill pipe carries water from the aquarium down to the canister filter. The unique design places intake slits across wider distances on the stem. As a result, it pulls in water from multiple depths spanning a wider range of the water column. This improves water circulation and allows particles suspended higher in the water column to readily enter the tube to the filter.

Code Name Pipe Size (mm) For Tank (cm)
160-110 Fill G2 13 60-90
160-120 Fill G3 17 120-180

Glass S Series

Specially designed for those who appreciate the beauty and discreetness of glass pipes but have problems mounting one because of obstructions like thick bracing, hoods and cabinetry. Because it's not restricted by a curve, you can set thedepth of the Fill or Flow S Series deeper than standard Fill Flow Pipes. It's also much easier to remove and clean!

Outflow

Outflow S Series

Similary, the S Series Flow pipe retians the unique upward-angled funnel design of a standard flow pipe but ends it right before it bends. You can fit any inflow piping connection from awkward corners or over huge bracing and still get the elegant look in the water!

After connecting you can adjust the bell to face any horizontal angle you want. A great feature when you have limited options on the placement of the outlet!

Code Name Pipe Size (mm) For Tank (cm)
160-111 Flow G2 13 60-90
160-121 Flow G3 17 120-180

Inflow

Inflow S Series

The S Series Fill Glass is made up of only the segment that will be visible in the aquarium. You can fit any inflow piping connection from awkward corners or over thick bracing & it look great!

Code Name Pipe Size (mm) For Tank (cm)
160-110 Fill G2 13 60-90
160-120 Fill G3 17 120-180

Stainless Steel Filtration Pipes

The Unbreakables

Outflow

Outflow P Series

The flow pipe has a slightly pressed output pointing at near 90degrees, giving you extra boost in current generation over a Flow Glass.

Code Name Pipe Size (mm) For Tank (cm)
160-201 Flow P1J 13 45-60
160-212 Flow P2J 13 60-90
160-222 Flow P3J 17 120-180

Inflow

Inflow P Series

The unique design of the intake pipe allows inflow of water at all angles throughout the entire length, with low risk of aquatic animals being siphoned into the filter. It is detachable for easy maintenance.

Code Name Pipe Size (mm) For Tank (cm) Inlet Length (cm)
160-200 Fill P1 13 45-60 5.5
160-2001 Fill P1S 13 10
160-210 Fill P2 13 60-90 25
160-220 Fill P3 17 120-180 27

Skimz

Robust modular skimmer for removing suface film

Skimz provides all the benefits of a good gold surface skimmer but studily and elegantly made with stainless steel. With the unique design of an adjustment shaft, you can adjust the skimmer higher or lower into the water and angle it in a wide arc of 270degrees.

Set away from the inner glass, this allows you to clean the tank wall easily.

Skimz is available in several parts, easily assembled.

Fit the Socket to the J-Pipe. Screw on the Adjustment rod and the slot it firmly to the J-Pipe via the Socket.

- -

Install Skimz on the aquarium and place the Plastic Skim Cup on the Skimmer Body. You are ready to go!

Skimz can be angled freely to your desire and needs of space.


Dimensions of Parts:
-

Product Code Product Name Description
160-251 Skimz Skimmer body kit with Sockets for 13/17mm
160-2101 P2SR J Replacement Pipe using for 13mm hose connection
160-2201 P3SR J Replacement Pipe using for 17mm hose connection
160-2511 Skimmer Cup Plastic Skimmer Cup
160-2512 O-Ring Replacement O-Ring on Skimmer Body